You assembly the sail panels with the Q-Bond Tape as you normally do with the seam stick tape. Then you add the Q-Edge Tape on top of the joint to get the perfect smooth surface. Turn the sail over and control the shape. Now it is time to do eventual corrections of intakes, in broad seams or horizontal joints. Flip the sail section or entire sail over and apply the Q-Edge Tape over the joint edges.

Now it is time for the activation.

Run the mobile activation unit along the joints, and activate the glue in the Q-Bond Tape with the ultrasonic energy. The joints will now be pressed out to a larger width and become much thinner and stronger than without the activation. After activation the sail shape can be corrected by opening the joint and a new activation.

After 3 days curing time the glue has obtained full strength and the sail is ready for usage.